<< 1 | 2 | 3 | 4 | 5 | 6

Some of the GENOA capabilities have been introduced in verification case studies. Most importantly, the capabilities of the entire GENOA CMC software system can be progressively enhanced during Phase 2 and Phase 3 development, as the user community becomes more familiar and accomplished with the initial GENOA CMC release. Table 2 summarizes the benefits and functionality of the GENOA CMC modules.

REFERENCES

1. Chamis, C.C. (1969), Minnetyan, L., “Progressive Fracture of Polymer Matrix Composite Structure a New Approach’’ 14th Annual Energy-Source Technology Conference and Exhibition, Houston Texas, January 1992.
2. Darwin Moon, Frank Abdi, Alpha Bill Davis,. Discrete Source Damage Tolerance evaluation of s/RFI stiffened panels, {Sampe 99}, Long Beach, Ca, May 1999
3. Nakazawa, S. “The MHOST Finite Element Program, 3-D Inelastic Analysis Methods for Hot Section Components,” Volume I – Theoretical Manual, NASA Contract Report CR-182205, August, 1991.
4. Cox, B. N, Flanegan, G., “Handbook of Analytical Methods for Textile Composites Binary Model Of Textile Composites,” Rockwell Science Center, Version 1, January, 1996.
5. Murthy, P. L. N., and Chamis, C. C. (1986). “Integrated composite analyzer (ICAN): Users and Programmers Manual.” NASA Tech. Paper 2515, Nat. Aeronautics and Space Admin., Washington, D. C.
6. Minnetyan, L., Murthy, P.L.N., and Chamis, C.C., “Composite Structure Global Fracture Toughness via Computational Simulation,” Computers & Structures, Vol. 37, No. 2, pp.175-180, November 1990
7. Irvine T. B. and Ginty C.A., “Progressive Fracture of Fiber Composites,” Journal of Composite Materials, Vol. 20, March 1986, pp. 166-184.
8. Minnetyan L., Chamis C.C., and Murthy P.L.N., “Structural Behavior of Composites with Progressive Fracture,” Journal of Reinforced Plastics and Composites, Vol. 11, No. 4, April 1992, pp. 413-442
9. Minnetyan L., Murthy P.L.N., and Chamis C.C., “Progressive Fracture in Composites Subjected to Hygrothermal Environment,” International Journal of Damage Mechanics, Vol. 1, No. 1, January 1992, pp. 60-79
10. Minnetyan, L., Chamis, C. C., and Murthy, P. L. N., “Structural Durability of a Composite Pressure Vessel,” Journal of Reinforced Plastics and Composites, Vol. 11, No. 11, November 1992, pp. 1251-1269
11. Minnetyan, L., Murthy, P.L.N. and Chamis, C. C. 1992. “Progressive Fracture in Composites Subjected to Hygrothermal Environment,” International Journal of Damage Mechanics, Vol. 1, No. 1, pp69-70.
12. Huang, D. “Computational Simulation of Damage Propagation in Three-Dimensional Woven Composites, A Doctoral Thesis, Clarkson University 1997.
13. Abdi, F. Goldsworthy and Associates “Blade Manufacturing Process Technology Development of Preform Composite Net Shapes,” December 1998.

<< 1 | 2 | 3 | 4 | 5 | 6